Maintenance after installation of steel braided rubber pipe

liweidong@nuoxincc.com

1. It is very important to accurately use the steel ru

bber hose to determine the length of the rubber hose you need, and it is also necessary to check whether the conditions of use of the rubber hose meet the requirements of the selected rubber hose. You should ensure that the rubber tube you will use is the most suitable. The working pressure and suction value should be carefully determined. In particular, it should be noted that changes in pressure or peak pressure exceeding the maximum allowed value will greatly shorten the life of the rubber tube. The ends of the rubber tube cannot be continuously immersed in the material being transported.

2. The rubber tube is ready for use. If you make the bending radius of the rubber tube less than the minimum value of the rule when installing the rubber tube, the service life of the rubber tube will be greatly shortened. Therefore, before the installation, it is recommended that you consult on the use of information, especially information about the bend radius of the rubber tube.

3. Protective cleaning of rubber hose: After use, it is recommended that you empty the rubber hose. It should be cleaned if necessary.

View: The rubber tube must be viewed after each use to ensure that it does not show structural damage.

Pressure: If the rubber tube is subjected to severe pressure when used, or the outer layer of the rubber tube will be touched with the liquid transported for a long time, a hydraulic test is advocated